Tel: +86-769-82868066
Home > News > Content
Categories

Add: RuiDa industrial park, Daxing street No.Six, QuanTang Management District, LiaoBu town, Dongguan City
Post Code: 523425
Tel: +86-769-82868066
Fax: +86-769-82868099
Mob: +8613825780422
Contacts: Amy Zou
Email: sales04@dgdtxs.com.cn


Thick Vacuum Forming Pre-processing

Thick Vacuum Forming Pre-processing

In the thick film blister process, if the pre-processing work is not done, thick plastic products in the demolding of the moment will lead to deformation of the product, deformation of the product quality is bound to be affected. In order to avoid the recurrence of similar problems, we must develop a corresponding solution to this problem.

In order to prevent deformation after blasting, first ask the user to check the temperature of the cooling water, but also to adjust the water volume of the nozzle, in line with the provisions of the range. Second, we must also adjust the wind direction of each position in order to find the most appropriate pressure for the production of thick film blister.

In the demolition of the time, it is best to use the vibration of the pressure on the mold forced smooth mold release; if the appropriate increase in the amount of air at the bottom, then to ensure the quality of plastic products is also helpful. If these can not solve the problem, it can only re-create the model, in order to overcome the deformation of the problem. If the pre-processing work did not do so, thick plastic products in the demolition of the moment will lead to deformation of the product, deformation of the product quality is bound to be affected. In order to avoid the recurrence of similar problems, we must develop a corresponding solution to this problem.

In order to prevent deformation after blasting, first ask the user to check the temperature of the cooling water, but also to adjust the water volume of the nozzle, in line with the provisions of the range. Second, we must also adjust the wind direction of each position in order to find the most appropriate pressure for the production of thick film blister.

In the demolition of the time, it is best to use the vibration of the pressure on the mold forced smooth mold release; if the appropriate increase in the amount of air at the bottom, then to ensure the quality of plastic products is also helpful. If these can not solve the problem, it can only re-create the model, in order to overcome the deformation of the problem. First, the plastic packaging can make the product's own price and image to be improved, as well as the role of shaping and dissemination of corporate brand image and visibility have a significant impact.

Second, the plastic packaging is also to show, protect the product for the purpose of packaging products for small commodities, you can place or hang in the supermarket shelves, so that your products perfectly show in front of customers to promote product sales.

Third, the plastic packaging to separate, shock, foil for the purpose of packaging products for the electronics, IT, industrial parts, toys, stationery, food, handicrafts and cosmetics, packaging and more small products, Beautiful.