Tel: +86-769-82868066
Home > News > Content
Categories
Add: RuiDa industrial park, Daxing street No.Six, QuanTang Management District, LiaoBu town, Dongguan City
Post Code: 523425
Tel: +86-769-82868066
Fax: +86-769-82868099
Mob: +8613825780422
Contacts: Amy Zou
Email: amyzou@plasticvacuumformed.com

Thermoforming Plastics Use Air Pressure

Thermoforming Plastics Use air pressure

Vacuum blistering has now become a term commonly accepted in the field of processing: "vacuum forming". And "pressure forming" (pressure forming) (pressure forming) refers to some special use of air pressure processing process. "Thermo forming" (thermo forming) (Thermo forming) is a variety of thermoplastic molding (including vacuum and pressure, or mixed molding) in general.

First, the advantages and disadvantages of vacuum plastic molding

To determine whether any of the processing and production processes are successful, whether the cost of the article produced by the method is appropriate compared to another method of processing; or the cost of the products produced by both methods is the same, but in this way The quality of the finished product is improved. In many applications, injection molding or blow molding is in competition with vacuum blistering.

However, in terms of packaging technology, unless the use of cardboard as a packaging material, or vacuum plastic molding technology is no other processing methods can compete with. The main advantage of vacuum blistering is its engineering economy. Forming a composite sheet, a foamed sheet, and a sheet of printed matter to replace the mold in place of the changing vacuum forming machine. Walls are thin and can be molded with high melt viscosity sheets, while those with the same wall thickness require low melt viscosity. For a small amount of plastic parts, the benefits of mold cost is another advantage of vacuum forming, and for high-volume parts, products can achieve very thin wall thickness and vacuum forming machine high yield ratio is very favorable The

Vacuum Blister The smallest part that can be produced is the packaging material of the tablet or the battery used for the watch, and can also produce very large products, such as 3 ~ 5m long garden pond. The thickness of the molding material may be from 0.05 to 15 mm, and for the foamed material, the thickness may be up to 60 mm. Any kind of thermoplastic or material with similar properties can be vacuum-molded.

The material used for vacuum blister molding is a sheet having a thickness of 0.05 to 15 mm, which is a semi-finished product made of pellets or powder. Therefore, compared with injection molding, vacuum plastic molding of raw materials will increase the additional cost.

In the vacuum plastic molding need to cut the sheet, which will produce scrap. The scraps are crushed and mixed with the original material to form the sheet again.

In vacuum blistering, only one surface of the sheet is in contact with the vacuum blister mold, so that only one surface is consistent with the geometrical dimensions of the vacuum forming die, and the contour of the other surface of the product is drawn by drawing.