Tel: +86-769-82868066
Home > News > Content

Add: RuiDa industrial park, Daxing street No.Six, QuanTang Management District, LiaoBu town, Dongguan City
Post Code: 523425
Tel: +86-769-82868066
Fax: +86-769-82868099
Mob: +8613825780422
Contacts: Amy Zou

ABS Vacuum Forming Blister Products

ABS Vacuum Forming Blister products

Blister process

• Prepare - Select the appropriate sheet and mold as required by the construction order.

1) to receive the relevant mold and clean lubrication

2) to receive the relevant sheet, pre-inspection material, size, thickness, weight (quantity)

• Mold installation - install the relevant mold, preheat the plastic machine, and check the vacuum pump suction. Preheated to the specified temperature, the commissioning to the product to meet the requirements of the construction order.

• Blister Molding Production - The sheet is installed in a suction machine for normal production (softening, blistering, molding), which is heated and softened for 3 seconds, cooled for 12 seconds, and the semi-finished product Piled up to the specified location. According to the construction of semi-finished product quality inspection.

• Semi-finished punching - install the corresponding punching die and commissioning, qualified after the semi-finished products for the cut, the waste into the designated basket, the finished product must ensure that the product clean and non-destructive, according to the construction of the finished product quality inspection.

• Blister finished packaging - Carton packaging, lined with moisture-proof dust bag, according to the construction order of the number of boxes per case will be qualified goods box. Fill in the contents of the certificate (name, size, weight, grade, batch number, volume number, class, date).

• Product storage - the total quantity required by construction order.

• Remove the mold - first cut off the power, to be completely cooling the heating parts of the plastic machine, remove the whole mold, clean and coated with anti-rust agent, check the defect after storage, do a good job with mold records.

• Clean and hygienic - Keep the equipment clean during the production process, do a good job of production records, do a good job of handover, must pay a quarter of an hour to pay off the production content, quality requirements, product stacking and so on. Conventional blister products

⑴ card bubble shell: refers to the paper card inserted into the three sides or four sides of the transparent blister and the formation of the packaging. It is characterized by packaging without the need for any packaging equipment.

⑵ bottom box: refers to a separate tray and a mask together with the composition of the box.

⑶ three fold blister: is the bubble after three fold formed by the three-dimensional bubble shell, which can effectively show the details of the product from all angles to improve the value of the product.

⑷ suck card blister: refers to the bubble in the heat with the plastic card with the plastic card surface, (Note: PET bubble paper card to PET oil, PVC bubble paper card to the PVC oil).

⑸ folding box: is a packaging products, the use of scissors scissors will be cut out of film folding film, and then bonded with a binder into a box-like products.

⑹ double bubble shell: refers to the upper and lower blister card with the product package together in the form of packaging.

⑺ Blister box: refers to the use of sheet plastic molding for the plastic box.

⑻ turnover tray: Blister processing to form a class of plastic tray, generally used for product turnover and protection.

⑼ fold bubble shell: refers to the side of the double bubble in the plastic molding together, after the formation of the end of the fold and face.

⑽ plastic inner care: the plastic hard film made of a specific groove of plastic, the product placed in the groove, play a protective and beautify the role of the product.

⑾ drums: refers to the material will be crimped together, divided into the bottom, barrel and cover.

⑿ cup cover: is a plastic forming process to form a kind, for the protection of food or liquid cup.

⒀ cover: the use of plastic molding process is the formation of a lid, mainly for the protection of products and make products more beautiful.